HJC黄金城

EPC Products Civil Engineering Testing Instruments Geotechnical Testing Quality Assurance Concrete Testing
产品中心

Model:

Use:for steel fibre concrete and hardened concrete

Standard:SIA162-6瑞士标准,ASTM C1018,EN 14651,EN 14888-3,EN 14888-5,SIA 162-6,ASTM C1550,SIA 162-6

Flexure-testing machine 300 kN for steel fibre concrete and hardened concrete



Machine structure

- Torsionally rigid press frame with 4 columns that have been clamped without play

- Dual action testing cylinder with long piston stroke in servo slide quality, mounted on the upper cross beam

- A directly activated servo-valve is installed on the test cylinder in order to ensure rapid and highly precise procedures during testing

- An anti-rotation protection system prevents turning of the piston rod with the upper bending beam and the load cell

- Adjustable bearings are installed in the testing zone. T-shaped grooves enable simple and accurate adjustment of the bearings

- The upper bending beam can be very simply converted from a 3-point to a 4-point testing configuration

Other options testing equipment is available forinstallation.

- The power drive and control system are located in a separate control cabinet



Technical data

Distance between the columns

front / side 900/550 mm

Elektronic pressure gauge, accuracy 0.5%

Force measuring range 3 - 300 kN

Piston stroke 250 mm

Bending roller dia. 40 mm

Bending-roller length 180 mm

Distance between upper / lower rollers 220 mm

Dim. (wxdxh) = 1200 x 850 x 2045 mm

Weight: approx. 3000 kg

3 x 230 V / 400 V / 50 Hz

Project Case
Solution
Download
相关标签
Flexure testing machine 300 kN,300KN,Flexure-testing machine 300 kN for steel fibre concrete and hardened concrete,Flexure testing machine,Flexure testing machine for steel fibre concrete,Flexure testing machine for hardened concrete,steel fibre concrete,
HJC黄金城





    HJC黄金城