Description
The unit is mounted on a stainless steel, floor standing frame ontowhich the filter, feed pump and pipework are attached.
A stainless steel drip tray is also included. Four grades of filter media aresupplied suitable for: pre-coat filter-aid, coarse clarifying, polishing andsterilisation.
The small stainless steel plate pack allows ease of handling. Makingteaching demonstrations more convenient. The filter pack between
the end castings is made up of one end and three intermediate thickturbid frames and one end and three intermediate filter plates.
The filter will take a dressing of 7 x 200mm x 200mm filter sheets givinga nominal filtering surface area of 0.22m2 and a nominal solids holdingcapacity of 1.5 litres.
Operation
The slurry to be filtered is connected by hose to the pump suction,and the pump is connected to a suitable electricity supply.
A hose fitted to the filter outlet takes the clear filtrate to a suitablereceiving vessel.
The plate pack has been designed to allow washing of the filter cake when filtering is complete. A pressure gauge situated at the filter inlet
is used to monitor the filtering process.
Feed/Circulating Pump
Centrifugal pump of all stainless steel construction with polished internals.
Technical specifications
Feed/Circulating Pump
Centrifugal pump of stainless steel construction with polished internals
Maximum flow rate
18.0 litres/min
Maximum head
2.0 bar
Motor 0.25kW
2800 rpm
Overall dimensions
Length
0.73m
Width
0.30m
Height
0.57m
Packed and created shipping specifications
Volume
0.5m3
Gross Weight
120Kg