HJC黄金城

Test rig for rotation and castor testing on seating furniture according to EN 1335, EN 14073-2, DIN 68878, NEN 1812, and BIFMA X5.1, load controlled. with loading pad. The pneumatic test axis has its own controller assembled in the immediate vicinity, which is operated from a PC via CAN-bus and work synchronised. It is supplied by a central supply terminal, which can carry up to 2 test axes. Central supply terminal, PC, screen, and keyboard can be positioned on a separate, moveable framework. Via a USB interface on the PC the data, control commands and software settings are transmitted via the central supply terminal to the test axes. Part of the test stand is our extensive testing and evalsuation software for the system software Windows 2000, XP or Win7.

The test rig consists of:

• 1 framework with traverse member and base plate 1200 x 1200mm, 12mm thick , galvanised steel,

• with screwed on stiffening, drill pattern with thread M10; moveable and vibration-reduced

• 1 electromotive test axis for the rotation of the turning knob, position-controlled, rotation angle +/- 360°

• 1 pneumatic test axis for seat, load controlled, piston diameter 80mm, stroke 500mm,

• test load up to 2500N, load cell 5kN. Load is transmitted vertically to the seat with lateral adjusting range.

• 1 load pad diameter 200mm for seat according to DIN EN 1335, clamp

• Operating pressure and cylinder limit switch control

• 1 emergency stop button on each test axis

• clamping device for X-base