HJC黄金城

IEC/ EN 60332-1 Test Apparatus

The IEC/ EN 60332-1 uses a test flame of specified height and colour, obtained with gas supplied at a suggested back pressure and flow rate. As mass flow controllers are used with this FTT apparatus, no specific back pressure is required. A thermal sensor is positioned over the flame, and the time for the temperature of the sensor to increase from 100°C to 700°C is determined. The time is used to confirm the heat-evolution profile of the test flame of 1kW.

The FTT IEC/ EN 60332-1 apparatus consists of a bench mounted open screen fitted with an electrically ignited burner, a control unit with safety interlocks and gas and air flow adjustment and a diverter panel with gas and air mass flow controllers. Features include:

• Horizontal specimen supports
• A burner in compliance with EN 60695-11-2, with simple angle adjustment from 90° to 45° and a gas safety system which only allows gas to flow when a flame is detected
• Open front metallic chamber 1200 mm high, 300 mm wide and 450 mm deep
• Mass flow controllers for accurate and stable flow control to the burner
• Electronic spark ignition
• Calibration thermocouple in compliance with EN 60695-11-2
• Optional draught free chamber