HJC黄金城

EPC Products Teaching and Research Laboratory Equipment Educational Food Technology FT63 Laboratory Process Chiller
产品中心
FT63 Laboratory Process Chiller

Model：FT63

Use：

Standard：

Related Products

Description


The FT63 contains a reservoir of cooled fluid, which is pumped through the external process to be cooled (eg heat exchanger system).

The cooling fluid can be water or a mixture of glycol and water depending on the output temperature required. This fluid is cooled by the integral refrigeration system.

A high-pressure pump is used to pump the fluid through the process.

A bypass valve facility enables the fluid to be recirculated independently of the process conditions.

Compressor

Reciprocating hermetically sealed compressor with a refrigerant cooled motor.

Evaporator

Packaged coil type, made of copper tubes and aluminium fins.

Condenser

Single air-cooled condenser manufactured from aluminium fins mechanically bonded to refrigeration-grade copper tubes. The condenser fan is of a low-noise axial type. Fan blades are fully enclosed by a safety grill.


Technical specifications

Cooling capacity

The cooling capacity of a chiller is dependent on its operating conditions, particularly the liquid temperature and  concentration.

The FT63 has a typical cooling capacity of 2kW with an outlet temperature of 0°C, using a 20% glycol solution (typical FT174X application). For other applications please consult Armfield.

Refrigerant

R407C Freon

Max ambient temp

32°C

Process pump

Head

6 bar max

Flow rate

4.8 m³/hr at 3.7 bar

Reservoir capacity

25 litres


Overall dimensions

Length

0.80m

Width

0.70m

Height

0.97m

Packed and crated shipping specifications

Volume

0.7m³

Gross weight

160Kg


Project Case
Solution
Download
相关标签
Armfield,FT63,Laboratory Process Chiller
HJC黄金城




    HJC黄金城