HJC黄金城

EPC Products Transducer & Data logger Strain Gauge bending and tensile DD series One-side strain gauge
产品中心
DD series One-side strain gauge

Model：DD series One-side strain gauge

Use：These gauges are intended for measuring the bending and tensile strains separately by simply bonding the gauges on one side of a plate or beam.

Standard：

 These gauges are intended for measuring the bending and tensile strains separately by simply bonding the gauges on one side of a plate or beam. It works on the assumption that the strain distribution in the section of the specimen is linear along the height of the section when the section is subjected to both tensile and bending stress. The gauges are effectively used for the measurement of a box construction in structures such as bridges or pressure vessels, where the reverse side of the measurement object is not accessible for strain gauge installation.



Applicable
specimen
Metal
Backing
Acrylic
Operational
temperature(°C)
-10 ~ +70°C
Element
Cu-Ni
Temperature
compensation range(°C)
—
Strain limit
0.15%
(1500×10-6 strain)
Applicable adhesive
CN, P-2
Fatigue life
at room temperature
1×105
(±1000×10-6 strain)
 



ONE-SIDE STRAIN GAUGE

DD

Type
Gauge
length
(mm)
Gauge
width
(mm)
Backing
length
(mm)
Backing
width
(mm)
Backing
thickness
c(mm)
Resistance
(Ω)
Thickness of
applicable
specimen (mm)
DD-1-15
3
2.9
15
7
1
350
Approx. 5 or less
DD-2-30
3
2.9
30
7
2
350
Approx. 5~10
Each package contains 10 gauges. 
Leadwire-integral service is available on request.
Project Case
Solution
Download
HJC黄金城


HJC黄金城