Model:DYNTTS MAXDYN
Use:The Advanced Dynamic Triaxial Testing System is a high-end, no compromise testing apparatus combining a triaxial cell with a dynamic actuator capable of applying load, deformation and stresses up to 10Hz.
Standard:ASTM D-3999, ASTM D-5311,GB/T50123-2019
Product Code : DYNTTS-10
The Advanced Dynamic Triaxial Testing System is a high-end, no compromise testing apparatus combining a triaxial cell with a dynamic actuator capable of applying load, deformation and stresses up to 10Hz. The cell itself is screw-driven from an integral base unit housing the motor drive. Axial force and axial deformation are applied through the base of the cell. The system can be combined with a dynamic cell pressure actuator such that cell pressures may also be applied dynamically up to fundamental frequency of the machine (i.e. 2Hz, 5Hz or 10Hz).
Key features | Benefits to the user |
---|---|
High accuracy electro-mechanical control: | The DYNTTS system is capable of very small strain static tests through to large strain dynamic tests. |
Interchangeable load cells: | Allows user to accommodate very soft to very stiff soils with ranges of 1, 2, 4, 8, 10, 16, 25, 40 and 60kN. |
In-built balanced ram (up to 5Hz systems): | Keeps cell pressure constant during cycling, meaning a dynamic pressure controller is not required (unless dynamic cycling of cell pressure is required). |
Interchangeable pedestals and triaxial extension top caps: | Allows testing of 38, 50, 70 and 100mm diameter test specimens in the same cell. |
Direct closed loop of axial displacement & axial force: | Accurate control in either axial displacement or axial force mode. |
Actuators |
High accuracy electromechanical |
---|---|
Axial Force Accuracy |
<0.1% |
Axial Force Accuracy |
16bit (i.e. <0.4N for 10kN load cell, <1.5N for 40kN load cell) |
Axial Load |
10kN, 20kN, 25kN, 40kN or 60kN |
Computer Interface |
USB |
Displacement Range |
100mm |
Displacement Resolution |
0.20um |
Operating Frequency (Hz) |
See pressure ranges |
Pressure Range (MPa) |
2Hz - 10kN to 60kN - 2MPa, 5Hz - 10kN to 60kN - 2MPa, 10Hz - 10kN to 20kN - 1400kPa, (2 & 5Hz can be upgradeable to 5MPa) |
Resolution of Measurement and Control |
10kHz control cycle |
Sample Sizes |
up to 300mm |