HJC黄金城

Ignitability, defined as the capability of a material being ignited using a radiant heat source, is one of the first properties to be manifest and should contribute largely to any assessment of fire hazard.

The Ignitability Test Apparatus is manufactured to conform to ISO 5657 and BS 476 Part 13. The Apparatus has been designed, principally for testing building materials and composites, but it is capable of testing any sample of size 165mm × 165mm and up to a maximum of 70mm thick. The Ignitability Apparatus measures the ignition characteristics of building materials or any exposed surfaces of essentially flat materials and specimens, mounted in a horizontal orientation.

FTT Ignitability Apparatus:
The test apparatus consists of a support framework which clamps the test specimen horizontally between a pressing plate such that a defined area of the upper surface of the specimen is exposed to radiation.

This radiation is provided by a radiator cone positioned above and supported from the specimen support framework. An automated pilot flame application mechanism is used to bring a test flame through the radiator cone to a position above the centre of the surface of the specimen. A specimen insertion and locations tray is used to position the specimen accurately on the pressing plate of the specimen support framework and a screening plate is used to shield the surface of the specimen during its insertion into the apparatus.